 |
| Place of Origin: | China |
| Brand Name: | SSEDU |
| Certification: | ISO9001 |
| Model Number: | CE 540 |
| Minimum Order Quantity: | 1 |
|---|---|
| Packaging Details: | Fine Plywood Box |
| Delivery Time: | 30 |
| Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
| Supply Ability: | 500 SET YEAR |
| Product Name: | Adsorptive Air Drying | Usage: | Heat Transfer Lab Equipment |
|---|---|---|---|
| Package: | Fine Plywood Box | Warranty: | 2 Years |
| High Light: | Adsorptive Air Drying Heat Transfer Equipments,Didactic Heat Transfer Equipment,2 Columns Heat Transfer Equipment |
||
CE 540 Adsorptive Air Drying Educational Equipment Heat Transfer Didactic Equipment
The CE 540 has been specifically designed to enable the complex theoretical principles of adsorption processes to be explained clearly and comprehensibly by means of experimentation.
A compressor draws in ambient air. The air flows through the water bath of a humidifier and thereafter has a relative humidity of 100%. Before the air flows from below into the adsorption column, its relative humidity and temperature are set using a heater. The humid air flows through the adsorbent (silica gel), which is placed as a fixed bed inside a transparent column. The quantity of humidity contained in the air is adsorbed in the process. The adsorbent contains an indicator. The colour of this indicator shows the position of the mass transfer zone (MTZ). The air dried in this way exits the column and flows out into the open.
To regenerate the adsorbent, ambient air is drawn in by a second compressor. The air is heated and flows from above into the column. This desorption process can also be observed through the transparent column. The trainer enables simultaneous investigation of the adsorption and desorption processes. Once the capacity of the adsorbent in one column is exhausted, the humid air is fed through a second column with regenerated adsorbent to dry it.
A circuit system featuring a pump and a refrigeration system is provided to adjust the temperature of the water bath in the humidifier. The temperature and humidity of the air being dried are adjusted by software. The flow rates of the two air flows can be adjusted by valves.
By recording the relative humidities and temperatures at all relevant points, the two processes can be fully balanced. The measured values are recorded by software. The software permits the adsorption and desorption processes to be depicted in a h-ω; diagram and enables breakthrough curves to be plotted.
Specification
continuous adsorptive air drying
2 columns for alternating charging and regeneration of the adsorbent
observation of mass transfer zone by using transparent columns and adsorbent with indicator
2 compressors to deliver the feed air and regenerative air out of the ambient atmosphere
humidification of the feed air by flowing through a water bath
circular system with pump and refrigeration system to adjust the water bath temperature
adjustment of relative humidity and temperature of feed air by heater
heater for temperature adjustment of the regenerative air
adjustment of regenerative air and feed air flow rates by valves
software with control functions and data acquisition via USB under Windows 8.1, 10
Technical data
2 columns
Ø approx. 80mm
height: approx. 800mm
2 compressors
max. positive pressure: 1bar
max. flow rate: 8m3/h
Humidifier pump
max. flow rate: 600L/h
max. head: 1,5m
Refrigeration system
refrigeration capacity: 395W at temperature
difference 10K / 250L
2 electric air heaters
power output (feed air): 160W
power output (regeneration): 2x 250W
Measuring ranges
flow rate: 2x 0…10Nm3/h
temperature: 3x 0…50°C; 1x 0…200°C, 1x -25…125°C (air)
rel. humidity: 4x 0…100%
temperature: 1x 0…50°C (water)
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 230V, 60Hz, 3 phases
UL/CSA optional
Dimensions and weight
LxWxH: 1390x750x1890mm
Weight: approx. 150kg
Required for operation
PC with Windows
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
