ZE3129 Process Control Set Educational Equipment Vocational Training Equipment
This trainer includes various video surveillance devices. With related experiment, you can be familiar with characteristic of video surveillance system, and you can master its control principle and way, it trains students to master corresponding knowledge and technical skills, it is suitable for higher vocational education, college, secondary vocational school and technician training school to conduct related major teaching and skills training test.
(1) The trainer adopted aluminum column frame type structure, it has universal wheel on the bottom, which can make movement flexibly, measuring meter and training power are build-in and integrated installed, which makes use easy and makes it difficult to damage.
(2) Its configuration is complete, it can be used in combination, it can achieve training content of various subjects
(3) The trainer has good safety protection system.
2. Performance parameter
(1) Input power: single phase three wire system 220V±10% 50Hz
(2) Dimension: 1600mm×800mm×1700mm
(3) Completer machine capacity: ＜1.5KVA
(4) Weight: ＜150kg
(5) Operating condition:
l Environment temperature -10℃～+40℃
2 Relative humidity ＜85%(25℃)
3. Product formation
3.1. Power control panel(the power box)
The power control panel adopted aluminum alloy face plate, it is enclosed housing structure.
3.2. Training workbench
The training workbench covered with fire-proof plate which is firm and wearable,there are two drawers and bottom cabinet of two sliding doors on the bottom of desktop, which can be used for placing information, tools, components and so on.
3.3. Configuration of power control panel
(1)two-phase three wire input power which is controlled by RCCB, it has emergency stop button,pressing the button under emergency circumstance, the breaker will shut off power supply.
(2)It is equipped with power light, 220V European style power output socket and 12V DC power output.
(3)It is equipped with UPS.
3.4. Technical data of support device
a) Computerize DVR : Video System: NTSC / PAL (auto detection)
(With 15 days Video Compression Format: H.264
Memory) Video Input: 8 Channels (Composite video signal 1 Vp-p 75Q BNC)
Built in DVR Card Video Loop Input: 8 Channels (Composite video signal 1 Vp-p 75Q
( 8 Channel ) BNC)
Video Output (BNC): Main motor: For stable display, Call
Monitor: For sequence display
Video Output (VGA): Built in VGA output for LCD Monitor
Audio Input / Output: 4 audio inputs, 2 audio output (Mono)
Maximum Recording Rate:
Frame: 704 x 480 pixels with 60 IPS <NTSC> / 704 x 576 pixels with
50 IPS <PAL>
Field: 704 x 240 pixels with 120 IPS <NTSC> / 704 x 288 pixels with
100 IPS <PAL>
CIF: 352 x 240 pixels with 240 IPS <NTSC> / 352 x 288 pixels with
200 IPS <PAL>
Motion Detection Area: 16 x 12 grids per Channel
Motion Detection Sensitivity: 4 Adjustable parameters for accurate detection
External Alarm: 8 Inputs, 1 Output
Picture Zoom: 2X Digital ZOOM
Power Source (±10%): DC 19V
Power Consumption (±10%) : <64V w
Operating Temperature: 10°C - 40°C (50T – 104 T )
Dimensions (mm): 432 (W) x 90(H) x 326(D) Approx.
Operating System: Windows 7 / Vista / XP / 2000
b) Movber : Standard
c) Adopter : 12 Volt
d) Camera Stand : Standard Stand
e) Video Cable : RG-6
f) Video Monitor LED : 22” Widescreen Format
22” VGA and DVI Video Inputs
1680 x 1050 Video Resolution
Use with Stand Alone Digital Video Recorders
Use with PC Based Geovision Surveillance Systems
VESA Mounting Compliant
g) Power Cable : Copper
h) Hard Disk : 1 TB (SATA / ATA ) or above
i) U P S : Capacity: 1200 VA
Input Voltage: 140V – 300 V
Input Connections: IEC 320 C14
Input Frequency: 50 Hz
Nominal Output Voltage: 230 V
Back up time: Minimum 15 minutes
j) BNC + AV Connector : Standard
4 training content
Training item one:operation of installation of hard disk video
Training item two:operation of pickup camera set
Training item three:simulation of security monitoring
Training item four:basic operation of security monitoring system
Training item five:method of system set
Training item six:method of camera set
Training item seven:method of video set
Training item eight:method of timing video set
Training item nine:method of set of hard disk management and system initialization
Training item ten:method of alert control
Training item eleven:judgment and dispose of line fault
Training item twelve:judgment and dispose of equipment trouble
Training item thirteen:design and install a simple application system
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Our products takes ISO9001 product management system.
||1 year, 2 years, 3 years or 5 years according to client requirements
||Plastic film+ carton+ Fine plywood
||International didactic equipment standard
||Educational equipment for university, college, vocational training centers
||Supply best quality Chinese products to the worldwide schools.
||Self owned brand
||Shouldshine, SSEDU, JSS.
||From 10 days to 60 days according to different items